As shown from the sequence of FIGS. 6, 7 and 8 dispenser 112 is increased above the top of load 150 while substance cylinders 132 and 162 are concurrently actuated. Fluid cylinder 132 is actuated to modify the orientation of online dispenser 112 coming from a top to bottom orientation usually parallel on the edges of the stress into a horizontal orientation generally parallel with top 153 of fill 150.
The pressure in the water tube 162 is unveiled allowing the first website information 156 and 2nd online guideline 154 to become pulled closer to each other as online dispenser 112 actually starts to alter orientation. Accumulator 152 will begin to dispense web previously accumulated between rollers 164 and 166, as the distance lessens between the first and second web guide 154 and 156. Web is no longer fed from web supply 126 to web dispenser 112, as web dispenser 112 changes orientation and moves into an orientation generally parallel to the top of the load. Rather from accumulator 152, though when web dispenser 112 is not in an orientation generally parallel to the sides of the load, web which is dispensed onto the load is not taken from web supply 126. This prevents binding and bunching of website in online dispenser 112, which usually would occur when revolving internet dispenser 112 relative to the film roll 126.